NIDEC COMPONENTS products lineup, You can refer to the detail of Pushbutton switch CFP2. CFP2-1FC-AW CFP2-2RC-AW CFP2-1FC4-AW CFP2-2RC4-AW CFP2-1FC6-AW CFP2-2RC6-AW CFP21FC-AW CFP22RC-AW CFP21FC4-AW CFP22RC4-AW CFP21FC6-AW CFP22RC6-AW 140000481450 140000481451 140000481452 140000481453
Все аналоги
Полный отчётТехнические параметры
| Условия эксплуатации и корпус | |
|---|---|
| Operating temperature range | - 40 ~ ＋ 85 ℃ |
| Storage temperature range | - 40 ~ ＋ 85 ℃ |
| Другое | |
| Dielectric strength | 250 VAC 1 minute |
| Electrical life | 10,000 operations at max. rating30,000 operations at min. rating |
| Flux Cleaning | Solvents: Fluorine or Alcohol type Cleaning after soldering should be done after the PC board is exposed to room temperature (30 ℃ or below) for 1 to 2 hours. Do not use ultrasonic cleaning. |
| Initial contact resistance | 100 m Ω max. (200 μVAC 1.5 mA） |
| Insulation resistance | 500 MΩ min. (250 VDC) |
| Mechanical life | 30,000 cycles |
| Operating force | 47 ± 0.98 N |
| Rating | 0.4 VA (28 VDC max.)1 μA 20 mVDC |
| Soldering Specifications | Manual Soldering / Device：Soldering iron 350 ℃ Max. 3 sec. Max. Auto Soldering／Device：Jet wave type or dip type 260 ℃ Max.3-5sec.(One time)Total dip time within 10 sec. Pre-heating should be done at temperatures from 80 °C to 120 °C and within 120 seconds When soldering two or more terminals to a common land, use solder resist to separate them |